 |
|
| REFRIGERATION APPLICATION |
|
|
Design, Manufacture, Installing and A/S of Refrigeration Package are done to suit Capacity and temperature condition as required in process. Applied Standard is designed and manufactured to match with applied Job spec and High Pressure Gas Safety Control Law (Korea Gas Safety Corporation).
All products are manufactured with best quality through NEWTEMS Quality procedure & assurance manual. R-22, alternate refrigerant(R-134a, R-501, R-410a), Ammonia, Propylene, Propane, Butane and New refrigerant can be used for the refrigerant for the Unit. Pressure vessels and Shell & Tube heat-exchanger of Package are designed according to ASME Code and High Gas Safety Control Law.
“U” Stamp application is possible when used for ASME Stamp work. Heat Exchanger in the Package is possible to apply to Shell & Tube type, Plate type and Air-cooled type. |
|
|
 |
Equipment composition of Standard Package |
|
|
| Screw Compressor (Oil injected, Open type) |
Condenser |
| Compressor driver motor |
Refrigerant receiver |
| Oil separator |
Evaporator (Chiller) |
| Oil cooler |
Accumulator |
| Oil filter |
Local Control Panel |
| Compressor suction strainer |
Base frame |
| Economizer |
Piping & wiring within package |
| Oil pump & motor |
Etc, Others |
|
|
|
Package Types are manufactured and delivered as follows. |
|
|
|
| ㆍScrew compressor unit |
|
| ㆍCondensing unit |
|
| ㆍChiller package |
|
| ㆍRefrigerator |
|
| ㆍRefrigeration Package |
|
|
|
|
|
|
|
|
| GAS APPLICATION |
|
|
Design, Manufacture, Installing and A/S of Refrigeration Package are done to suit Capacity and temperature condition required in process.
Unit is designed and manufactured to match with applied Job spec.
Code and High Pressure Gas Safety Control Law (Korea Gas Safety Corporation) standard.
All products are manufactured with best quality through NEWTEMS Quality procedure & assurance manual.
Product is possible to apply to Indoor, Outdoor, Hazardous area by Purpose and location.
Pressure vessels and Shell & Tube heat-exchanger of Package are manufactured through High Pressure Gas Safety Control Law and ASME Code.
“U” Stamp application is possible when used for ASME Stamp work. Matching with API 619 CODE is possible upon Client’s request. |
|
|
|
Application Gas |
|
|
| Ammonia |
Methane |
Butane |
| Natural Gas |
R502/R404A/R407A/AZ50 |
Coke Oven Gas |
| Nitrogen |
Fuel Gas |
Propane |
| Helium |
Propylene |
HydrogenButane |
| Hydrocarbon(Wet&Mixed) |
Sour Gas Butane |
Butane |
| Town Gas |
|
|
|
|
|
Equipment composition of Standard Package |
|
|
| Screw Compressor (Oil injected, Open type) |
Compressor suction strainer |
| Compressor driver motor |
After cooler, Recycle cooler |
| Oil separator |
Suction knock-out drum |
| Oil pump & motor |
Accumulator |
| Oil cooler |
Local Control Panel |
| Oil filter |
Base frame |
| Lube oil system |
Piping & wiring within package |
| Shaft sealing system |
Etc, Others |
|
|
|
